32mm Strut Spacer kit = 52mm Lift
Isuzu Dmax (2012 - Present)
This listing is for a set of two 32mm front suspension strut spacers for the UK Isuzu Dmax pickup.
In addition to the 2 spacers there are 2 spacer that are fitted between the top arm and top ball joint. These are needed because as you raise the front suspension the top arm angle changes ( slopes down more ) and becomes very close to the spring ( see picture ) and changes the suspension geometry. The ball joint spacers correct for this angle change of the top arm.
These 32mm spacers will lift the front of your truck approximately 52mm ( 2 Inch ) due to the leverage effect of the front suspension arms. ( see our other items for the smaller 25mm spacer )
There are two of types of kits that are on the market :
- Version 1 - Plastic type which require existing top mount studs to be removed & replaced with longer ones.
- Version 2 - Alloy type with Studs already built into spacer, an easy fit between shock & top mount. (this type)
Please note - These spacers will effect aspects of the front suspension geometry and raise the center of gravity of the truck - these will change the way your truck drives so please take time and adjust your driving style accordingly.
These are made from aluminium alloy billet with a blue anodised finish.
The inner diameter is 62mm - see picture
The outer diameter is 116mm - see picture.
See our other items for this spacer in 25mm ( 40mm lift )
See our other items for snorkels and rear lift kits !
These are NOT genuine Isuzu parts.
Fitting Details
Which Vehicles will this fit ?
This WILL fit Isuzu Dmax models from 2012 - Present
This WILL NOT fit the earlier type L200 (1995 -2006) (K74)
- Choosing a selection results in a full page refresh.
- Opens in a new window.