Front Bumper Inner Fog Lamp Brackets for Land Rover Freelander 2 2011 - Square Fog Type

Fog Light Brackets (PAIR)

for Land Rover Freelander 2 2011 on

As these parts are fitted to the bottom of the front bumper they often get damaged.

Some base models of the Freelander 2 (2011 on version) did not come with fog lights installed.   Instead, Land Rover fitted a blanking plate.

These brackets allow you to install a light unit into the recess in the front bumper and upgrade the look of your vehicle.

These can be fitted to the inside of the base model front bumper but will require you to remove the front bumper and bond these brackets to the inside ( use a PU adhesive like Tiger Seal or similar )

These brackets are made from ABS plastic.

This listing is for a pair of fog light brackets (left and right hand).

To complete the upgrade you will need light units and bezels which we also sell, please see our other items.

The fog lamp wiring may not be present in your vehicle for a 'plug and play' installation as it may not have been included in the loom at the factory by Land Rover.

If you do not have the wiring, we suggest installing a DRL (daytime running light) with an ignition feed which is a straight-forward procedure.

This is not a genuine Land Rover item.

Please note:
You will also need 6 x DYH500110 clips and 6 x 4.8x19 self tapper screws to install the light units to these brackets.

Fitting Details

Remove your front bumper

Remove the existing fog lamp blanks

Bond these brackets onto the rear of the bumper.

Fit the clips and screw the fog lamps into place.

Connect wiring and refit bumper and fit front fog lamp bezels.

Which Vehicles will this fit ?

This item WILL fit the Freelander 2 ( called LR2 in some regions ) all models with square type Fog Light cut out in bumper - in 2011 most models changed from a round cut out to a square cut out )

This item WILL NOT Fit any other Range Rover or Land Rover Vehicle