35mm Wheel Spacers - 4pc - for Nissan Navara D40

Wheel Spacer Set (x4)

35mm / 6 stud / 114.3mm PCD

for Nissan Navara D40

This listing is for a set of 4 wheel spacers for the Nissan Navara D40.

These wheel spacers are 35mm - so will give an extra track width (or offset) of 70mm to your vehicle ( 35mm each side ).

These are a matched 6 bolt pattern with a 114.3mm PCD (pitch circle diameter) - designed to fit the Navara D40 perfectly.

Wheels spacers can be fitted to improve look of your vehicle, giving it a 'wider stance'.

You may also want to fit spacers for the extra clearance allowing for wider tyres to be fitted or to benefit from the improved traction when cornering.

These are machined from billet aluminium for a precise and balanced fit.

These are hubcentric spacers which retain the strength of the design as the hub carries the weight and not the studs/bolts (the diameter of the centre bore on the wheel spacers is 66.1mm).

These are supplied as a set of 4 spacers, and include pre-fitted high tensile studs and nuts.

Also check out our range of other Navara spares and accessories.

When fitting any new wheel or wheel spacers periodically check all wheel nuts / spacer nut are tight.

These are not genuine Nissan parts.

Fitting Details

See below fitting video - we fit the spacers to our later NP300 but the procedure is the same for the Navara D40 - its the same spacer / stud pattern etc.

Which Vehicles will this fit ?

These WILL fit the Nissan Navara D40 model

These WILL fit the Nissan Navara NP300 model

These WILL NOT fit the Nissan Navara D22 model.