Item Details - Range Rover P38 Titanium SILVER Bonnet Lettering ( Curved )

3D Titanium Silver Bonnet Lettering ( Curved )

Range Rover P38

Enhance your Range Rover P38 by fitting these Titanium Silver letters to the bonnet of your vehicle.

This is 100% the same style, font and size as the new Range Rover lettering and is a great way to update your P38 by replacing the old flat vinyl lettering with these full 3D letters.

The area on the bonnet where the lettering is mounted is not flat it is CURVED and this lettering is curved to match the bonnet. This means the lettering will sit flatter and not stick up at the corners.

We are the only company we know selling the lettering that is curved on the back face so it sits properly on the P38 bonnet.

We have now produced the fitting template for the P38 to ensure you get the correct spacing and position of the letters on your P38 to match the original bonnet lettering spacing ( the pacing on the P38 is not the same as the spacing on the L322 / Sport so we had these templates made for the P38 )

The letters come complete with automotive grade self adhesive tape pre-applied so you just need to peel off the backing film and stick them onto your car.

This listing is for the one set of the letters RANEGROVRE and a pre clean wipe sachet.

We also have these letters and the correct templates made for the rear of the P38 - see our other items.

These letters are made from ABS plastic ( same as original L322 lettering ) with a silver painted finish.

We also have the VOGUE lettering in the same style / colour.

We also have available the lettering A-Z in this font - see our other items.

We also have this lettering available in Chrome and Gloss Black - see our other items.

These are not genuine Landrover parts.

Fitting Details

Place the template over the original lettering and mark the corners of the template with masking tape on the bonnet.

Remove the template and remove the original grey lettering ( use hot air to help soften the adhesive holding the original letters on )

Place the template on the bonnet in line with masking tape markers

Remove the liner from the adhesive tape on the rear of each letter and Insert the letter into the space on the template.

See below for fitting video.